Fire Collars Market By Product Type (Cast-in Fire Collars, Wrap-around Fire Collars, Rebated Fire Collars, Collar Sleeves); By Pipe Material (PVC Pipes, PE & PP Pipes, Composite Pipes); By End Use (Residential, Commercial, Industrial, Institutional); By Geography, Segment Revenue Estimation, Forecast, 2026–2032

Fire Collars Market: Tested Penetration Systems Gain Value as Fire-Stopping Accountability Tightens

The Global Fire Collars Market was valued at USD 0.34 billion in 2025 and is projected to reach USD 0.49 billion by 2032, expanding at a CAGR of 5.2% during 2026–2032, according to Strategic Market Research.

 

Fire collars are passive fire-safety devices fitted around plastic pipes where they pass through walls or floors. During a fire, the pipe melts and leaves an opening. The heat causes the material inside the collar to expand rapidly, closing the gap and preventing flames, smoke, and harmful gases from spreading to other parts of the building. Demand for fire collars is increasing because building regulations are becoming stricter, plastic piping is widely used, and construction activity is growing in cities worldwide. Improved fire-collar technology also provides faster and more reliable protection, making these devices essential in modern residential, commercial, and healthcare buildings.

 

Cast-In Collars Lead Planned Construction, While Retrofit Products Close the Gap

Cast-in fire collars generated USD 129.2 million in 2025 and are forecast to grow at 4.7% annually, as demand is supported by early-stage construction planning where systems are embedded before concrete is poured. Companies such as Hilti and ROCKWOOL supply cast-in solutions designed for high-rise and commercial projects, where pre-approved systems help reduce rework and inspection failures.

Wrap-around fire collars represented USD 115.6 million in 2025 and are expected to expand at 6.0% annually, driven by retrofit and refurbishment activity. Companies like Quelfire and Fischer offer split and retrofit collars that can be installed around existing pipework, making them widely used in building upgrades and service replacements where access is limited.

Rebated collars accounted for 16.0% of the market, or USD 54.4 million, and are forecast to grow at 5.1%, supported by use in space-constrained or architecturally sensitive installations. These are often specified in projects where contractors need recessed or low-profile solutions to meet both fire safety and design requirements.

Collar sleeves held the remaining 12.0% and USD 40.8 million, with a 5.4% CAGR, as demand increases for integrated solutions that combine fire stopping with insulation. Companies such as Promat supply sleeve-based systems used in complex mechanical and HVAC installations, where installers prefer fewer components and faster, code-compliant installation.

 

PVC Remains the Main Revenue Base, but PE and PP Applications Expand Faster

PVC pipes generated 58.0% of fire collar demand in 2025 (USD 197.2 million), mainly because they are widely used in drainage and water systems. This creates consistent demand for fire collars in standard building projects. For example, ROCKWOOL and Hilti both supply tested collar systems for PVC/uPVC pipe penetrations, which are commonly required in residential and commercial construction where fire-rated walls and floors are standard. Growth is steady at 4.8%, as PVC remains the default low-cost option in most projects.

PE and PP pipes accounted for 30.0% (USD 102.0 million) and are the fastest-growing segment at 6.1% CAGR. Demand is rising as these materials are increasingly used in modern plumbing and infrastructure due to durability and corrosion resistance. Companies such as Fischer and Promat have expanded certified fire-stopping systems for PE and PP pipes, supporting adoption in high-rise buildings and district utility networks where more penetrations require tested fire collars.

Composite pipes made up 12.0% (USD 40.8 million), growing at 5.5%. These are used in energy-efficient and space-limited building designs, but their mixed structure requires more specific testing. Companies like Hilti and Pyroplex offer approved solutions for composite systems, helping meet fire-safety requirements in more complex mechanical installations.

 

Commercial Buildings Generate the Highest Penetration Density

Commercial buildings led demand with a 36.0% share (USD 122.4 million in 2025), driven by strict fire-safety enforcement in offices, hotels, and retail projects. Companies such as Hilti and ROCKWOOL supply tested fire collar systems widely used in large commercial developments, where frequent tenant fit-outs require repeated sealing of new service penetrations. For example, Hilti’s firestop systems are commonly specified in high-rise office and mixed-use projects because they provide documented, tested solutions that simplify compliance during design changes.

Residential buildings followed with 31.0% (USD 105.4 million), supported by ongoing apartment construction and refurbishment. Suppliers like Pyroplex and Quelfire provide wrap-around and retrofit collars used in housing projects where pipes are installed after structural work, making flexible installation essential.

Industrial facilities accounted for 20.0% (USD 68.0 million), supported by plant expansion and warehouse upgrades. Companies such as Fischer supply fire-stopping systems used in manufacturing and logistics sites where new utility pipelines must maintain compartmentation and pass inspection standards.

Institutional buildings made up 13.0% (USD 44.2 million), driven by hospitals, schools, and public infrastructure upgrades. Promat and similar suppliers provide certified fire collar systems used in these high-occupancy environments, where continuous safety compliance and minimal disruption during refurbishment are critical.

 

Europe Leads, While Asia-Pacific Records the Strongest Expansion

Europe accounted for 36.0% of global revenue (USD 122.4 million) in 2025, but its 4.8% CAGR is below the global average because fire collars are already widely embedded in building codes and passive fire protection standards. Growth is mainly compliance-driven rather than expansion-led, supported by frameworks like the EU Construction Products Regulation (EU 2024/3110) and national rules such as Approved Document B in England, which require tested penetration-sealing systems for service openings. Key companies such as Hilti, ROCKWOOL, and Fischer operate in this mature market by providing certified firestop systems for new builds and retrofits. Demand is therefore sustained by replacement cycles, inspections, and ongoing compliance rather than new adoption.

Asia-Pacific held 29.0% (USD 98.6 million) and is the fastest-growing region with a 6.3% CAGR, driven by rapid high-rise construction and stricter fire codes. Countries like Singapore, China, and India are increasingly mandating tested fire collars for plastic pipe penetrations under standards such as EN 1366-3 and ASTM E814. Companies including Promat, Pyroplex, and Quelfire are expanding in the region, supporting both new construction and retrofit demand. Growth is strongly linked to urbanisation and tighter enforcement of international fire safety standards.

North America accounted for 24.0% (USD 81.6 million) with a 5.0% CAGR, driven by strict system-based regulations under UL 1479, ASTM E814, and the IBC. Fire collars must be part of fully tested assemblies, reinforcing demand for certified systems rather than standalone products. Major players such as 3M and Hilti North America supply integrated firestop systems, with demand closely tied to code compliance and listing approvals.

Latin America (6.0%, USD 20.4 million) and the Middle East & Africa (5.0%, USD 17.0 million) are smaller but growing at 5.5% and 5.7% CAGR, respectively. Growth is driven by adoption of international fire safety standards in large commercial, healthcare, and infrastructure projects. Hilti, Fischer, 3M, and Promat support these regions through specification-led projects, where compliance with global fire-test standards is increasingly required for approval.

 

Test Coverage, Not Collar Hardware, Defines Competitive Advantage

Competition in the fire collars market includes diversified construction-product companies, specialist passive fire protection suppliers, and local manufacturers operating across regional building codes and certification systems. At the global level, major manufacturers such as 3M, Hilti Group, and Specified Technologies Inc. (STI) are widely recognized for producing intumescent fire collars designed to seal plastic pipe penetrations and maintain required structural fire resistance ratings in walls and floors.

In the United States, key manufacturers include Specified Technologies Inc. (STI), which develops firestop wrap strips and retrofit fire collars for a range of plastic pipe materials used in commercial and institutional buildings. RectorSeal also supplies firestop sleeves and collar systems, including its Metacaulk range, which is commonly used in plumbing and mechanical installations. 3M offers a broad portfolio of fire protection solutions, including cast-in-place devices and adjustable fire collars designed for demanding construction environments.

In Europe, Hilti Group is a leading supplier of firestop collar systems such as the CP 643N, which are tested and certified to European EN standards for use in walls and floors. Walraven manufactures the Pacifyre range of fire collars and sleeves for international applications, while fischer Fixings provides FFC fire collars made from powder-coated steel and filled with graphite-based intumescent material. Flamro also produces a variety of fire protection collars, including both standard and endless designs, for use with different combustible pipe types and installation conditions.

Globally, companies such as Promat, part of the Etex Group, supply a wide range of passive fire protection systems including boards, collars, and wrap solutions used in large commercial and infrastructure projects. ROCKWOOL also offers firestop solutions that integrate stone wool insulation with intumescent components, providing combined thermal and fire-sealing performance for pipe penetrations in building assemblies.

 

Report Coverage Table

Report Attribute	Details
Forecast Period	2026 – 2032
Market Size Value in 2025	USD 0.34 Billion
Revenue Forecast in 2032	USD 0.49 Billion
Overall Growth Rate	CAGR of 5.2% (2026 – 2032)
Base Year for Estimation	2025
Historical Data	2019 – 2024
Unit	USD Million, CAGR (2026 – 2032)
Segmentation	By Product Type, By Pipe Material, By End Use, By Geography
By Product Type	Cast-in Fire Collars, Wrap-around Fire Collars, Rebated Fire Collars, Collar Sleeves
By Pipe Material	PVC Pipes, PE & PP Pipes, Composite Pipes
By End Use	Residential, Commercial, Industrial, Institutional
By Region	North America, Europe, Asia-Pacific, Latin America, Middle East & Africa
Country Scope	U.S., Canada, UK, Germany, France, Italy, China, Japan, South Korea, India, Brazil, Mexico, Saudi Arabia, UAE, South Africa
Market Drivers	Stricter passive fire-protection requirements for plastic pipe penetrations Rising construction of residential and commercial buildings Growing emphasis on compartmentation and life-safety compliance
Customization Option	Available upon request